homestead.fyi / BEDCOVER

Raised Bed Hoop Cover

Five 3/4 in PVC hoops and a film cover for a 4 x 8 ft raised bed.

Draft plan, generated from the model. Not yet build-tested.
4 x 8 ft bedFits
5Hoops
47 inHeight
1 to 2 hrBuild time
~$148.20Materials, part estimate

Drawings All dimensions in inches

3D viewfinished
3D view
3D view, framingsiding and roof removed
3D view, framing
Front elevation
Front elevation 50 1/4 in 58 7/8 in
Right elevation
Right elevation 108 in 58 7/8 in
Plan viewfrom above
Plan view 50 1/4 in 108 in

Shopping list $136.20 checked / $12.00 estimated

ItemStoreQtyEachLineNote
3/4 in PVC pipe, 10 ftHome Depot6$5.76$34.56five bent hoops and a ridge
6 mil greenhouse film, 20 x 25 ftWalmart Business1$83.99$83.99covers the hoops; the rest is spare
3/4 in PVC fittings, assortedHome Depot1$12.00$12.00clips and straps
UV zip ties 11 in, 100 ct (also used for tie wire)Home Depot1$17.65$17.65
Total before tax~$148.20
Filled dot: price read from a store listing on Oct 20, 2026. Hollow dot: estimate. Prices come from the master price list, so they change when it changes.

Build steps

  1. Slip the ends of five 10 ft lengths of 3/4 in PVC pipe over 18 in lengths of rebar, driven 12 in into the soil inside the bed, every 22 in along it. Or clip them to the outside of the boards with pipe straps.
  2. Run a 10 ft length of pipe along the top, wired or clipped to each hoop, as a ridge.
  3. Drape the film over the hoops and bury or clip the edges. Clamp it to the boards with pipe clamps so you can roll it up.
  4. On warm days, roll the sides up or leave the ends open.

Before you start